ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: usr / share / doc / tcsh-6.18.01

# $tcsh: BUGS,v 3.5 2006/03/02 18:46:44 christos Exp $
============
Bugs in TCSH
============
-IAN! idallen@ncf.ca
April 2002

--------------------------------------------------------------------------------
| *FIXED*
| From: idallen
| Subject: Can't redirect output of "source"
|    % echo "date" >file
|    % source file >output
|    Thu Sep      3 17:47:19 EDT 1987
--------------------------------------------------------------------------------

From: idallen
Subject: nice is not cumulative
   % nice date
   % nice nice date

Both have a nice of 4; nice does not accumulate.

From: idallen
Subject: no warning on integer overflow
    % @ x=99999999999999999999999
    % echo $x
    -159383553

From: idallen
Subject: goto seeks backwards in terminal input
    % goto x
    goto? ignored
    goto? ignored
    goto? ignored
    goto? x:
    % goto x

The terminal is now hung - you have to break out.

From: idallen
Subject: nice applied to too many commands
    % nice +20 simple `long`

The CSH shell applies the nice to both commands "simple" and "long".

From: idallen
Subject: redirection always happens in single-line "if"
   if ( 0 ) echo hi > date

The file date is created empty.

From: idallen
Subject: Expanding variable with newline generates syntax error
       % set x="abc\
       def"
       % echo "$x"
       Unmatched ".

From: idallen
Subject: Expanding variable with newline generates extra word
       % set x="abc\
       def"
       % echo $x
       abc  def
       % set y=( $x ) ; echo $#y
       3

From: idallen
Subject: Modifier ":e" doesn't work on history
    CSH is missing an entry in a case statement for it.

From: idallen
Subject: Shell messages appear on stdout; get redirected
    If a program in a shell script exits with a signal that the shell
    reports (e.g. Terminated), the report appears on standard output
    and if the output of the shell script is redirected the report
    gets sent there and you never find out.

From: Steve Hayman <sahayman>
Subject: No error message given for failure to NICE
    % nice -10 date
    Fri May 30 12:11:12 EDT 1986
    CSH never checks the error returns from nice().

From: Ray Butterworth <rbutterworth>
Subject: CSH history reading takes '#' as a comment
    % echo a b # c d
    a b # c d
    % exit
    % login
    % history
      ...
      99 echo a b

'#' indicates a comment when reading from a shell script file,
    and of course CSH thinks it is reading from a file when it reads
    the history back in.

From: idallen
Subject: csh: No current job, even if only one job
    % somecommand ^Z
    Suspended
    % bg
    [1]   somecommand &
    % fg
    fg: No current job.

The C shell always turns off the current job indicator for a job
    that is put in the background with "bg" -- even if it is the only job.

From: idallen (Ian! D. Allen)
Subject: Redirection ignored inside if ( { cmd >xxx } ) ....
    % if ( { date >out } ) echo hi
    Sun Apr 14 13:24:31 EDT 2002
    hi

The shell does not set up its file descriptors for the forked
    command.  The redirection is completely ignored.

>From idallen
Subject: Error in CSH script causes script exit
    If a script has an error in a built-in command (e.g. redirection file not
    found), the script exits instead of continuing.

From: idallen (Ian! D. Allen)
Subject: Variables $$, $# don't accept :-modifiers
    echo   $$:q   $#:q
    12345:q 0:q

From: idallen (Ian! D. Allen)
Subject: Variable $* (a synonym for argv) doesn't accept subscripts.
    % set argv=( a b c d )
    % echo $argv[2]
    b
    % echo $*[2]
    echo: No match.

>From idallen
Subject: Using WHICH from CSH
    The WHICH command tells the wrong thing if you've created
    a new file and haven't done a REHASH.  WHICH thinks you
    get the new file, but the CSH will give you the old one.

From: idallen (Ian! D. Allen)
Subject: Redirected input to built-in functions misbehaves badly
    % date | echo hi
    hi
    % % jobs
    [1]  + Running                       date |

Note the duplicate prompt and spurious job entry.

Just a general mess of mishandled processes.

From: idallen (Ian! D. Allen)
Subject: stopped pipes generate spurious job ID
    % date | sleep 99
    ^Z
    Suspended
    [1] 123 456

>From idallen(idallen )
Subject: NICE and NOHUP have no effect as last component of sub-shells.
    % nice +10 ps -laxtd0
     UID   PID  PPID CP PRI NI RSS WCHAN STAT TT  TIME COMMAND
      47  3559     1  0  15  0  33 ff000 S    d0  0:16 -csh (csh)
      47  7606  3559125  76 10  23       R N  d0  0:01 ps -laxtd0
    % (nice +10 ps -laxtd0)
     UID   PID  PPID CP PRI NI RSS WCHAN STAT TT  TIME COMMAND
      47  3559     1  3  15  0  33 ff000 S    d0  0:16 -csh (csh)
      47  7605  3559 92  48  0  23       R    d0  0:01 ps -laxtd0

% (nice ps lx)
    ... Shows no nice.
    % (nice ps lx;date)
    ... Works.
    % (nohup sleep 999)&
    ... Doesn't ignore SIGHUP.
    % (nohup sleep 999;date)&
    ... Works.
    % echo `nice ps lx >/dev/tty`
    ... Shows no nice.
    % echo `nice ps lx >/dev/tty;date`
    ... Works.
    % echo `nohup sleep 999`
    ... Doesn't ignore SIGHUP.
    % echo `nohup sleep 999;date`
    ... Works.

>From idallen
Subject: you can't nest back-quotes
    % echo ` echo \`pwd\` `
    Unmatched `.

From: idallen (Ian! D. Allen)
Subject: GLOB not applied to names in setenv or unsetenv
    % setenv `echo abc` def
    
    It doesn't set abc, it sets the nasty variable: `echo abc`

% unsetenv `echo abc def ghi`

Doesn't unset abc or def or ghi

>From idallen Thu Mar 15 09:48:35 1984
Subject: Stopping jobs in list of command names throws away the rest.
    % a ; b ; c
    CSH documents that if you stop B, C will immediately start.
    It doesn't.  The rest of the list gets thrown away.

From: idallen (Ian! D. Allen)
Subject: Stopping jobs in source'd file aborts the rest of the file.
    With the file TEST containing:

mail
        echo Hi There you never see this

and typing

% source TEST

and then using ^Z to stop MAIL, the rest of the TEST file is abandoned.
    This is especially annoying in one's .login or .cshrc.

>From idallen
Subject: CSH doesn't handle EXIT when it sees it.
    % date; exit 99 ; date ; date
    Wed Mar 14 19:21:51 EST 1984
    Wed Mar 14 19:21:52 EST 1984
    Wed Mar 14 19:21:53 EST 1984

The shell doesn't flush pending input when the EXIT is seen.
    The shell then exits with status 0 instead of status 99.

>From idallen
Subject: CSH mishandles suspend in subshells.
    % ( date; suspend; date )
    Sun Mar  4 01:28:28 EST 1984

Suspended
    % fg
    ( date; suspend; date )

Suspended (tty input)
    ...and you can never get it started again.

>From idallenSun Mar  18 01:28:16
Subject: ECHO mis-handles interrupts and errors in back-quotes
    % echo `sleep 999`
    <hit break>
    [1] 24244
    % jobs
    [1]    Interrupt                     ` ... `

Note the inability of CSH to tell you the command name used inside
    the back-quotes.

>From idallen
Subject: CSH botches $#X where X is environment var
    % echo $#path
    4
    % echo $#PATH
    /usr/ucb:/bin:/usr/bin:/usr/public

>From idallen Wed Apr 18, 1984
Subject: Inconsistent handling of variables
    The manual says that "set x=word" assigns a single word to x.
    To assign multiple words, one is supposed to use "set x=(words)".
    But, CSH allows "set x=`date`", which sets x to the many words
    resulting from `date`, and $x[1] prints "Mon".
    
    One observes that if x and y are single-word variables, the statements:
    % set x=word2
    % set y[1]=word2
    are identical; both replace the contents of the variable with word2.

But, you can't assign a word to y[1] if y doesn't exist, even though
    you can (of course) assign a word to plain "y" if y doesn't exist.

>From idallen(Ian! D. Allen)
Subject: extra next level when nested single-line IF line ends in THEN
    Any IF line that ends in THEN is taken as another nesting level, and
    requires a corresponding ENDIF:

if ( 0 ) then
        if ( 0 ) echo This line ends with then
    endif
    echo You do not see this.
    endif # This shouldn't be needed; but it is.
    echo Now you do.

>From idallen
Subject: EXEC doesn't close the file descriptors

/* This program will demonstrate that CSH leaves internal
     * file descriptors open across an EXEC built-in command.
     *
     *      % exec ./a.out
     */
    main()
    {
    int i;

for( i=0; i < 20; i++ ){
        printf("%d = %d\n", i, isatty(i) );
    }
    }

The output shows:
    > exec ./a.out
    0 = 1
    1 = 1
    2 = 1
    3 = 1
    4 = 1
    5 = 1
    6 = 0
    7 = 0
    8 = 0
    9 = 0
    ...

From: idallen
Subject: can't test success of CD, CHDIR, etc.
    cd nosuchdir || echo CD failed
    cd nosuchdir && echo CD failed
    cd nosuchdir ;  echo CD failed

None of the above work in CSH.

>From idallen Mon Dec 16 21:40:32 1985
Subject: GLOB loses memory on directories
    echo /*/*/*

If you interrupt the above GLOB, CSH loses memory.

From: idallen
Subject: C Shells don't parse when looking for labels.
    The shells just look at the first word on each line.  You can
    cause the shell to branch in to the middle of a HERE document:

#!/bin/csh -f
    onintr quit
    sleep 999
    cat << EOF
    quit:
    echo Amazing how this prints.
    exit 88  # this exit is taken when break is hit
    EOF
    quit:
    echo You never get here.

>From arwhite Thu Aug 26 13:53:58 1982
Subject: CSH/Bourne shell inconsistent newlines
    "`command`" deletes newlines from the command in the cshell, not in the
    Bourne shell.

>From idallen (Ian! D. Allen)
Subject: aliases aren't seen after redirection
   % date >x
   % >x date

% alias foo date
   % foo >x
   % >x foo
   foo: Command not found.

>From idallen (Ian! D. Allen)
Subject: $< misbehaves in pipes

% date | /bin/echo aaa $< bbb
   abcdef
   aaa a bbb
   % bcdef
   bcdef: Command not found.

>From chris@pixutl.UUCP (chris) Fri Oct  5 14:01:13 1984
Subject: bug in CSH (history)
    There are a couple of bugs in the 'history' command of /bin/csh (and
    offspring, such as newcsh):

1) The maximum number of arguments to the history command is set to 2.
       % history -h -r 2  # fails

>From idallen
Subject: C Shell expression operators explained

Some odd CSH context-sensitive features.  There is ambiguity on how
    !~ != and !( should be interpreted:

1 -  % ~idallen/study                 # a valid command line
       2 -  % !~                             # doesn't work
       3 -  % echo " !~ "                    # no history
       4 -  % if ( abc !~ def ) echo hi

1 -  % =xxx                           # a valid command line
       2 -  % !=                             # doesn't work
       3 -  % echo " != "                    # no history
       4 -  % if ( 1 != 2 ) echo hi

1 -  % ( date )                       # a valid command line
       2 -  % !(                             # doesn't work
       3 -  % echo " !( "                    # no history
       4 -  % if ( !( 1 + 1 ) ) echo hi

The C Shell parser isn't clever enough to distinguish any of cases 2,
    3, or 4, so it always behaves as if the character pair was part of an
    expression, not a history substitution.

--------------------------------------------------------------------------------
| *NOT A BUG*
| >From idallenThu Jun 27 08:20:08 1985
| Subject: Re: Using > vs. | on shell built-in commands.
| 
|     CSH cannot put the output of the JOBS command into a pipe.  In fact,
|     the output is going into the pipe, but the output is empty.  You
|     couldn't know this, but these shells implement piped built-in commands
|     by forking the shell to create an independent process for which the
|     main shell can wait.  But the internal process table is cleaned
|     out after a fork(), since a forked shell is just like a subshell
|     and must have its own clean process table in which to enter its own
|     running jobs.  So by the time the JOBS command executes, it's in a
|     child shell that has no jobs running.  Hence, the output is empty.
|     "echo `jobs`" and "( jobs )" are both empty, for the same reason.
--------------------------------------------------------------------------------

From: jjg@security.UUCP (Jeff Glass)
Subject: csh and I/O redirection

put these four lines in a file, say cshtest :

#! /bin/csh -f
        cat << END | ( sh & )
        echo hi there
        END

( the intent is to send some commands to sh to be executed in the
    background, without csh printing the job number of the sh. )

now, from csh, enter the command

source cshtest

and note that you see the message "hi there".
    now enter the commands

chmod +x cshtest
        ./cshtest

and you get no output.

removing either the parentheses or the ampersand causes the message
    to appear, but not quietly in the background.  I don't understand why
    it works when source'd but not when exec'd, either.

--------------------------------------------------------------------------------
| *FIXED*
| From: matt@prism.UUCP
| Subject: Pointless csh puzzle
| 
|     Here's a pointless little csh puzzle:  In the c-shell, it is
|     possible to set and environment variable whose name consist of
|     more than one word, in the obvious way:
| 
|         % setenv "FOO BAR" quux
| 
|     The printenv builtin will show it residing happily in the
|     environment.  Now for the puzzle:  can anyone find a way to GET
|     TO the value of this variable, using only csh builtins?  In
|     other words, is there an <expression> such that
| 
|         % echo <expression>
| 
|     will print "quux" on the screen, where <expression> is formed
|     only from csh commands?
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
| *FIXED*
| >From tim@ISM780B.UUCP Wed Nov 20 18:00:00 1985
| Subject: Re: C-shell puzzles
| 
|     Here's another good C shell quirk:
| 
|         $ echo foo
|         foo
|         $ repeat 3 echo foo
|         foo
|         foo
|         foo
|         $ repeat 3 repeat 3 echo foo
|         foo
|         foo
|         foo
|         foo
|         foo
|         $ repeat $N repeat $M echo foo        # $N and $M are integers
|         [ $N + $M - 1 foo's ]
|         $ repeat $N1 repeat $N2 ... repeat $Nk echo foo
|         [ $N1 + $N2 + ... + $Nk - k + 1 foo's ]
|         $
--------------------------------------------------------------------------------

>From pur-ee!uiucdcsb!liberte Mon Dec 30 23:20:31 EST 1985
Subject: Csh null strings

There are at least two different-sized null strings in csh.
    But sometimes they are equal anyway.

% set x = ""
        % set y = "`echo`"
        % echo $#x $#y
        1 0

% set x =
        % set y = `echo`
        % echo $#x $#y
        1 0

% set x = ("")
        % set y = ("`echo`")
        % echo $#x $#y
        1 0

% set x = ()
        % set y = (`echo`)
        % echo $#x $#y
        0 0

% if (() == "`echo`") echo huh
        % if (() == ("`echo`")) echo huh
        huh
        % if ("" == ("`echo`")) echo huh
        % if ("" == "`echo`") echo "huh?"
        huh?

>On Jul 18,  8:15am, mark@peek.org (Mark Peek) wrote:
>-- Subject: Updated tcsh-6.12.0 release date?
>
>| Hi Christos,
>| I know I've been (part of) the cause of slipping the release date out
>| for tcsh-6.12.0. :-) Do you have an updated date for releasing it?
>| I'm trying to determine whether it will fit in the time frame for
>| shipment with the next FreeBSD 5.0-DP release.
>
>I hope to release it sometime next week. There are only minor changes in it.
>Is that convenient, or would you like me to push it more?

I sent a note to the FreeBSD release engineers and they're inclined 
to hold off on including the new version in the release which they're 
branching later today. If DP2 slips out a bit they might consider 
including it. I'd say go ahead with your current schedule and I'll 
import it whenever it is available. I definitely will be including it 
into the next -stable FreeBSD 4.7 release.

BTW, one of the release engineers pointed out a bug with using 
jobcmd. If you use the example in the book to update an xterm and 
then run something like
    grep bar `cat file.list`
It screws up the xterm title bar containing "Faulty alias 'jobcmd' 
removed" plus the list of files from the cat command.

The good news is that I was able to reproduce this at home last 
night. The bad news is that it is working fine right now here at 
work. Oh wait, let me log in remotely and look at the alias I was 
using...got it! The command fails if you use:

alias jobcmd 'echo -n "^[]2;\!#^G"'

but works fine if you use: (note the switch of ' and " quotes)

alias jobcmd "echo -n '^[]2;\!#^G'"

Note: I used the above by vi'ing a file and sourcing it from the shell.

If you can confirm, I think this just needs to be updated in the man page.

>Thanks for all the help BTW...

No problem. I like fixing bugs and contributing code...especially for 
a great piece of software like tcsh that I use *all* the time. Thank 
you for keeping it going!

Mark

[+] ..
[-] BUGS [edit]
[-] Copyright [edit]
[-] FAQ [edit]
[-] Fixes [edit]
[-] NewThings [edit]
[-] README [edit]
[-] WishList [edit]
[-] complete.tcsh [edit]