ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: usr / sbin

#!/bin/bash
#
# Copyright (C) 2004-2009 Red Hat, Inc. All rights reserved.
#
# This file is part of the lvm2 package.
#
# This copyrighted material is made available to anyone wishing to use,
# modify, copy, or redistribute it subject to the terms and conditions
# of the GNU General Public License v.2.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

#
# Edit an lvm.conf file to adjust various properties
#

# cluster with clvmd and/or locking lib?
HANDLE_CLUSTER=0

# cluster without clvmd?
HANDLE_HALVM=0

# also enable services appropriately (lvmetad, clvmd)?
HANDLE_SERVICES=0

# also enable cmirrord service in addition?
HANDLE_MIRROR_SERVICE=0

# also start/start services in addition to enabling/disabling them?
START_STOP_SERVICES=0

function usage
{
    echo "Usage: $0 <command>"
    echo ""
    echo "Commands:"
    echo "Enable clvm:  --enable-cluster [--lockinglibdir <dir>] [--lockinglib <lib>]"
    echo "Disable clvm: --disable-cluster"
    echo "Enable halvm: --enable-halvm"
    echo "Disable halvm: --disable-halvm"
    echo "Set locking library: --lockinglibdir <dir> [--lockinglib <lib>]"
    echo ""
    echo "Global options:"
    echo "Config file location: --file <configfile>"
    echo "Set services: --services [--mirrorservice] [--startstopservices]"
    echo ""
    echo "Use the separate command 'lvmconfig' to display configuration information"
}

function set_default_use_lvmetad_var
{
	eval "$(lvm dumpconfig --type default global/use_lvmetad 2>/dev/null)"
	if [ "$?" != 0 ]; then
		USE_LVMETAD=0
	else
                USE_LVMETAD=$use_lvmetad
	fi
}

function parse_args
{
    while [ -n "$1" ]; do
        case "$1" in
            --enable-cluster)
                LOCKING_TYPE=3
                USE_LVMETAD=0
                HANDLE_CLUSTER=1
                shift
                ;;
            --disable-cluster)
                LOCKING_TYPE=1
                set_default_use_lvmetad_var
                HANDLE_CLUSTER=1
                shift
                ;;
            --enable-halvm)
                LOCKING_TYPE=1
		USE_LVMETAD=0
                HANDLE_HALVM=1
		shift
                ;;
            --disable-halvm)
                LOCKING_TYPE=1
                set_default_use_lvmetad_var
                HANDLE_HALVM=1
		shift
                ;;
            --lockinglibdir)
                if [ -n "$2" ]; then
                    LOCKINGLIBDIR=$2
                    shift 2
                else
                    usage
                    exit 1
                fi
                HANDLE_CLUSTER=1
                ;;
            --lockinglib)
                if [ -n "$2" ]; then
                    LOCKINGLIB=$2
                    shift 2
                else
                    usage
                    exit 1
                fi
                HANDLE_CLUSTER=1
                ;;
            --file)
                if [ -n "$2" ]; then
                    CONFIGFILE=$2
                    shift 2
                else
                    usage
                    exit 1
                fi
                ;;
            --services)
                HANDLE_SERVICES=1
                shift
                ;;
            --mirrorservice)
                HANDLE_MIRROR_SERVICE=1
                shift
                ;;
            --startstopservices)
                START_STOP_SERVICES=1
                shift
                ;;
            *)
                usage
                exit 1
        esac
    done

if [ -n "$LOCKINGLIBDIR" ] || [ -n "$LOCKINGLIB" ]; then
        LOCKING_TYPE=2
        USE_LVMETAD=0
    fi
}

function validate_args
{
    [ -z "$CONFIGFILE" ] && CONFIGFILE="/etc/lvm/lvm.conf"

if [ ! -f "$CONFIGFILE" ]
            then
            echo "$CONFIGFILE does not exist"
            exit 10
    fi

if [ "$HANDLE_CLUSTER" = 1 ] && [ "$HANDLE_HALVM" = 1 ]; then
        echo "Either HA LVM or cluster method may be used at one time"
	    exit 18
    fi

if [ "$HANDLE_SERVICES" = 0 ]; then
        if [ "$HANDLE_MIRROR_SERVICE" = 1 ]; then
            echo "--mirrorservice may be used only with --services"
            exit 19
        fi
        if [ "$START_STOP_SERVICES" = 1 ]; then
            echo "--startstopservices may be used only with --services"
            exit 19
        fi
    fi

if [ -z "$LOCKING_TYPE" ] && [ -z "$LOCKINGLIBDIR" ]; then
        usage
        exit 1
    fi

if [ -n "$LOCKINGLIBDIR" ]; then

if [ "${LOCKINGLIBDIR:0:1}" != "/" ]
            then
            echo "Prefix must be an absolute path name (starting with a /)"
            exit 12
        fi

if [ -n "$LOCKINGLIB" ] && [ ! -f "$LOCKINGLIBDIR/$LOCKINGLIB" ]
            then
            echo "$LOCKINGLIBDIR/$LOCKINGLIB does not exist, did you do a \"make install\" ?"
            exit 11
        fi

if [ "$LOCKING_TYPE" = 1 ] ; then
	if [ -n "$LOCKINGLIBDIR" ] || [ -n "$LOCKINGLIB" ]; then
		echo "Superfluous locking lib parameter, ignoring"
	fi
    fi
}

umask 0077

parse_args "$@"

validate_args

SCRIPTFILE=/etc/lvm/.lvmconf-script.tmp
TMPFILE=/etc/lvm/.lvmconf-tmp.tmp

# Flags so we know which parts of the file we can replace and which need
# adding. These are return codes from grep, so zero means it IS present!
have_type=1
have_dir=1
have_library=1
have_use_lvmetad=1
have_global=1

grep -q '^[[:blank:]]*locking_type[[:blank:]]*=' "$CONFIGFILE"
have_type=$?

grep -q '^[[:blank:]]*library_dir[[:blank:]]*=' "$CONFIGFILE"
have_dir=$?

grep -q '^[[:blank:]]*locking_library[[:blank:]]*=' "$CONFIGFILE"
have_library=$?

grep -q '^[[:blank:]]*use_lvmetad[[:blank:]]*=' "$CONFIGFILE"
have_use_lvmetad=$?

# Those options are in section "global {" so we must have one if any are present.
if [ "$have_type" = 0 ] || [ "$have_dir" = 0 ] || [ "$have_library" = 0 ] || [ "$have_use_lvmetad" = 0 ]
then

# See if we can find it...
    grep -q '^[[:blank:]]*global[[:blank:]]*{' $CONFIGFILE
    have_global=$?

if [ "$have_global" = 1 ] 
	then
	echo "global keys but no 'global {' found, can't edit file"
	exit 13
    fi
fi

if [ "$LOCKING_TYPE" = 2 ] && [ -z "$LOCKINGLIBDIR" ] && [ "$have_dir" = 1 ]; then
	echo "no library_dir specified in $CONFIGFILE"
	exit 16
fi

# So if we don't have "global {" we need to create one and 
# populate it

if [ "$have_global" = 1 ]
then
    if [ -z "$LOCKING_TYPE" ]; then
	LOCKING_TYPE=1
    fi
    if [ "$LOCKING_TYPE" = 3 ] || [ "$LOCKING_TYPE" = 2 ]; then
        cat "$CONFIGFILE" - <<EOF > "$TMPFILE"
global {
    # Enable locking for cluster LVM
    locking_type = $LOCKING_TYPE
    library_dir = "$LOCKINGLIBDIR"
    # Disable lvmetad in cluster
    use_lvmetad = 0
EOF
        if [ $? != 0 ]
        then
    	    echo "failed to create temporary config file, $CONFIGFILE not updated"
	    exit 14
        fi
	if [ -n "$LOCKINGLIB" ]; then
	    cat - <<EOF >> "$TMPFILE"
    locking_library = "$LOCKINGLIB"
EOF
            if [ $? != 0 ]
            then
	        echo "failed to create temporary config file, $CONFIGFILE not updated"
	        exit 16
            fi
	fi
	cat - <<EOF >> "$TMPFILE"
}
EOF
    fi # if we aren't setting cluster locking, we don't need to create a global section

if [ $? != 0 ]
    then
	echo "failed to create temporary config file, $CONFIGFILE not updated"
	exit 17
    fi
else
    #
    # We have a "global {" section, so add or replace the
    # locking entries as appropriate
    #

if [ -n "$LOCKING_TYPE" ]; then
	if [ "$have_type" = 0 ] 
	then
	    SEDCMD=" s/^[[:blank:]]*locking_type[[:blank:]]*=.*/\ \ \ \ locking_type = $LOCKING_TYPE/g"
	else
	    SEDCMD=" /global[[:blank:]]*{/a\ \ \ \ locking_type = $LOCKING_TYPE"
	fi
    fi

if [ -n "$LOCKINGLIBDIR" ]; then
        if [ "$have_dir" = 0 ] 
            then
            SEDCMD="${SEDCMD}\ns'^[[:blank:]]*library_dir[[:blank:]]*=.*'\ \ \ \ library_dir = \"$LOCKINGLIBDIR\"'g"
        else
            SEDCMD="${SEDCMD}\n/global[[:blank:]]*{/a\ \ \ \ library_dir = \"$LOCKINGLIBDIR\""
        fi
    fi

if [ -n "$LOCKINGLIB" ]; then
        if [ "$have_library" = 0 ]
            then
            SEDCMD="${SEDCMD}\ns/^[[:blank:]]*locking_library[[:blank:]]*=.*/\ \ \ \ locking_library = \"$LOCKINGLIB\"/g"
        else
            SEDCMD="${SEDCMD}\n/global[[:blank:]]*{/a\ \ \ \ locking_library = \"$LOCKINGLIB\""
        fi
    fi

if [ "$have_use_lvmetad" = 0 ]
    then
        SEDCMD="${SEDCMD}\ns'^[[:blank:]]*use_lvmetad[[:blank:]]*=.*'\ \ \ \ use_lvmetad = $USE_LVMETAD'g"
    else
        SEDCMD="${SEDCMD}\n/global[[:blank:]]*{/a\ \ \ \ use_lvmetad = $USE_LVMETAD"
    fi

echo -e "$SEDCMD" > "$SCRIPTFILE"
    sed  <"$CONFIGFILE" >"$TMPFILE" -f "$SCRIPTFILE"
    if [ $? != 0 ]
    then
	echo "sed failed, $CONFIGFILE not updated"
	exit 15
    fi
fi

# Now we have a suitably editted config file in a temp place,
# backup the original and copy our new one into place.

cp "$CONFIGFILE" "$CONFIGFILE.lvmconfold"
if [ $? != 0 ]
    then
    echo "failed to backup old config file, $CONFIGFILE not updated"
    exit 2
fi

cp "$TMPFILE" "$CONFIGFILE"
if [ $? != 0 ]
    then
    echo "failed to copy new config file into place, check $CONFIGFILE is still OK"
    exit 3
fi

rm -f "$SCRIPTFILE" "$TMPFILE"

function set_service {
    local type=$1
    local action=$2
    shift 2

if [ "$type" = "systemd" ]; then
        if [ "$action" = "activate" ]; then
            for i in "$@"; do
                unset LoadState
                eval "$($SYSTEMCTL_BIN show "$i" -p LoadState 2>/dev/null)"
                test  "$LoadState" = "loaded" || continue
                $SYSTEMCTL_BIN enable "$i"
                if [ "$START_STOP_SERVICES" = 1 ]; then
                    $SYSTEMCTL_BIN start "$i"
                fi
            done
        elif [ "$action" = "deactivate" ]; then
            for i in "$@"; do
                unset LoadState
                eval "$($SYSTEMCTL_BIN show "$i" -p LoadState 2>/dev/null)"
                test  "$LoadState" = "loaded" || continue
                "$SYSTEMCTL_BIN" disable "$i"
                if [ "$START_STOP_SERVICES" = 1 ]; then
                    "$SYSTEMCTL_BIN" stop "$i"
                fi
            done
        fi
    elif [ "$type" = "sysv" ]; then
        if [ "$action" = "activate" ]; then
            for i in "$@"; do
                "$CHKCONFIG_BIN" --list "$i" > /dev/null || continue
                "$CHKCONFIG_BIN" "$i" on
                if [ "$START_STOP_SERVICES" = 1 ]; then
                    "$SERVICE_BIN" "$i" start
                fi
            done
        elif [ "$action" = "deactivate" ]; then
            for i in "$@"; do
                "$CHKCONFIG_BIN" --list "$i" > /dev/null  || continue
                if [ "$START_STOP_SERVICES" = 1 ]; then
                    "$SERVICE_BIN" "$i" stop
                fi
                "$CHKCONFIG_BIN" "$i" off
            done
        fi
    fi
}

# Start/stop and enable/disable services if needed.

if [ "$HANDLE_SERVICES" = 1 ]; then

SYSTEMCTL_BIN=$(which systemctl 2>/dev/null)
    CHKCONFIG_BIN=$(which chkconfig 2>/dev/null)
    SERVICE_BIN=$(which service 2>/dev/null)

# Systemd services
    if [ -n "$SYSTEMCTL_BIN" ]; then
        if [ "$USE_LVMETAD" = 0 ]; then
            set_service systemd deactivate lvm2-lvmetad.service lvm2-lvmetad.socket
        else
            set_service systemd activate lvm2-lvmetad.socket
        fi

if [ "$LOCKING_TYPE" = 3 ]; then
            set_service systemd activate lvm2-cluster-activation.service
            if [ "$HANDLE_MIRROR_SERVICE" = 1 ]; then
                set_service activate lvm2-cmirrord.service
            fi
        else
            set_service systemd deactivate lvm2-cluster-activation.service
            if [ "$HANDLE_MIRROR_SERVICE" = 1 ]; then
                set_service systemd deactivate lvm2-cmirrord.service
            fi
        fi

# System V init scripts
    elif [ -n "$SERVICE_BIN" ] && [ -n "$CHKCONFIG_BIN" ]; then
        if [ "$USE_LVMETAD" = 0 ]; then
            set_service sysv deactivate lvm2-lvmetad
        else
            set_service sysv activate lvm2-lvmetad
        fi

if [ "$LOCKING_TYPE" = 3 ]; then
            set_service sysv activate clvmd
            if [ "$HANDLE_MIRROR_SERVICE" = 1 ]; then
                set_service sysv activate cmirrord
            fi
        else
            set_service sysv deactivate clvmd
            if [ "$HANDLE_MIRROR_SERVICE" = 1 ]; then
                set_service sysv deactivate cmirrord
            fi
        fi

# None of the service tools found, error out
    else
        echo "Missing tools to handle services"
        exit 20
    fi
fi

[+] ..
[-] tc [edit]
[-] iw [edit]
[-] chkconfig [edit]
[-] era_invalidate [edit]
[-] alternatives [edit]
[-] pdata_tools [edit]
[-] pwck [edit]
[-] update-alternatives [edit]
[-] cache_restore [edit]
[-] vigr [edit]
[-] build-locale-archive [edit]
[-] ipset [edit]
[-] zdump [edit]
[-] grubby [edit]
[-] zic [edit]
[-] safe_finger [edit]
[-] ldconfig [edit]
[-] sosreport [edit]
[-] sln [edit]
[-] cache_writeback [edit]
[-] vipw [edit]
[-] glibc_post_upgrade.x86_64 [edit]
[-] cache_repair [edit]
[-] era_check [edit]
[-] logrotate [edit]
[-] iconvconfig [edit]
[-] iconvconfig.x86_64 [edit]
[-] era_restore [edit]
[-] fsck [edit]
[-] install-info [edit]
[-] tcpd [edit]
[-] mkfs [edit]
[-] capsh [edit]
[-] tcpdmatch [edit]
[-] getcap [edit]
[-] try-from [edit]
[-] getpcaps [edit]
[-] fsck.xfs [edit]
[-] setcap [edit]
[-] thin_check [edit]
[-] halt [edit]
[-] sefcontext_compile [edit]
[-] mkfs.xfs [edit]
[-] chroot [edit]
[-] thin_delta [edit]
[-] init [edit]
[-] cracklib-check [edit]
[-] thin_dump [edit]
[-] ifup [edit]
[-] cracklib-format [edit]
[-] iptables-restore [edit]
[-] cracklib-packer [edit]
[-] iptables [edit]
[-] lvm [edit]
[-] cracklib-unpacker [edit]
[-] era_dump [edit]
[-] lchage [edit]
[-] create-cracklib-dict [edit]
[-] iptables-save [edit]
[-] sasldblistusers2 [edit]
[-] xfs_admin [edit]
[-] saslpasswd2 [edit]
[-] xfs_bmap [edit]
[-] mkdict [edit]
[-] xfs_copy [edit]
[-] packer [edit]
[-] xfs_db [edit]
[-] faillock [edit]
[-] xtables-multi [edit]
[-] mkhomedir_helper [edit]
[-] arpd [edit]
[-] lgroupadd [edit]
[-] pam_console_apply [edit]
[-] xfs_estimate [edit]
[-] pam_tally2 [edit]
[-] bridge [edit]
[-] lvs [edit]
[-] pam_timestamp_check [edit]
[-] cbq [edit]
[-] lgroupdel [edit]
[-] pwhistory_helper [edit]
[-] xfs_freeze [edit]
[-] unix_chkpwd [edit]
[-] xfs_fsr [edit]
[-] unix_update [edit]
[-] ctstat [edit]
[-] pvck [edit]
[-] genl-ctrl-list [edit]
[-] devlink [edit]
[-] pvs [edit]
[-] nl-class-add [edit]
[-] genl [edit]
[-] lgroupmod [edit]
[-] nl-class-delete [edit]
[-] ifcfg [edit]
[-] vgck [edit]
[-] nl-class-list [edit]
[-] ifstat [edit]
[-] vgs [edit]
[-] nl-classid-lookup [edit]
[-] xfs_growfs [edit]
[-] nl-cls-add [edit]
[-] ip [edit]
[-] lid [edit]
[-] nl-cls-delete [edit]
[-] xfs_info [edit]
[-] nl-cls-list [edit]
[-] lnstat [edit]
[-] sshd [edit]
[-] nl-link-list [edit]
[-] nstat [edit]
[-] arp [edit]
[-] nl-pktloc-lookup [edit]
[-] routef [edit]
[-] quot [edit]
[-] nl-qdisc-add [edit]
[-] routel [edit]
[-] lshw [edit]
[-] nl-qdisc-delete [edit]
[-] rtacct [edit]
[-] sa [edit]
[-] nl-qdisc-list [edit]
[-] xfs_io [edit]
[-] ethtool [edit]
[-] xfs_logprint [edit]
[-] killall5 [edit]
[-] xfs_mdrestore [edit]
[-] pidof [edit]
[-] xfs_metadump [edit]
[-] cache_check [edit]
[-] xfs_mkfile [edit]
[-] cache_dump [edit]
[-] rtmon [edit]
[-] crda [edit]
[-] cache_metadata_size [edit]
[-] thin_ls [edit]
[-] rtpr [edit]
[-] lnewusers [edit]
[-] thin_metadata_size [edit]
[-] xfs_ncheck [edit]
[-] thin_repair [edit]
[-] selabel_lookup_best_match [edit]
[-] thin_restore [edit]
[-] xfs_quota [edit]
[-] thin_rmap [edit]
[-] xfs_repair [edit]
[-] thin_trim [edit]
[-] xfs_rtcp [edit]
[-] ip6tables [edit]
[-] rtstat [edit]
[-] atd [edit]
[-] ip6tables-restore [edit]
[-] ss [edit]
[-] lpasswd [edit]
[-] ip6tables-save [edit]
[-] luseradd [edit]
[-] installkernel [edit]
[-] new-kernel-pkg [edit]
[-] luserdel [edit]
[-] lusermod [edit]
[-] key.dns_resolver [edit]
[-] request-key [edit]
[-] avcstat [edit]
[-] getenforce [edit]
[-] getsebool [edit]
[-] matchpathcon [edit]
[-] selabel_digest [edit]
[-] selabel_lookup [edit]
[-] semanage [edit]
[-] accton [edit]
[-] selabel_partial_match [edit]
[-] swaplabel [edit]
[-] rngd [edit]
[-] selinux_restorecon [edit]
[-] swapoff [edit]
[-] mtr [edit]
[-] selinuxconlist [edit]
[-] swapon [edit]
[-] lsof [edit]
[-] selinuxdefcon [edit]
[-] switch_root [edit]
[-] rdma [edit]
[-] selinuxenabled [edit]
[-] wipefs [edit]
[-] tcsd [edit]
[-] selinuxexeccon [edit]
[-] dmfilemapd [edit]
[-] setenforce [edit]
[-] dmsetup [edit]
[-] hardlink [edit]
[-] zramctl [edit]
[-] nscd [edit]
[-] addgnupghome [edit]
[-] kpartx [edit]
[-] rndc [edit]
[-] applygnupgdefaults [edit]
[-] dmstats [edit]
[-] biosdecode [edit]
[-] dracut [edit]
[-] dmidecode [edit]
[-] depmod [edit]
[-] ownership [edit]
[-] insmod [edit]
[-] vpddecode [edit]
[-] lsmod [edit]
[-] sgpio [edit]
[-] modinfo [edit]
[-] adduser [edit]
[-] modprobe [edit]
[-] chpasswd [edit]
[-] rmmod [edit]
[-] groupadd [edit]
[-] weak-modules [edit]
[-] groupdel [edit]
[-] poweroff [edit]
[-] groupmems [edit]
[-] reboot [edit]
[-] groupmod [edit]
[-] runlevel [edit]
[-] grpck [edit]
[-] shutdown [edit]
[-] grpconv [edit]
[-] telinit [edit]
[-] grpunconv [edit]
[-] udevadm [edit]
[-] newusers [edit]
[-] arping [edit]
[-] pwconv [edit]
[-] clockdiff [edit]
[-] pwunconv [edit]
[-] ifenslave [edit]
[-] useradd [edit]
[-] ping6 [edit]
[-] userdel [edit]
[-] rdisc [edit]
[-] usermod [edit]
[-] tracepath [edit]
[-] sysctl [edit]
[-] tracepath6 [edit]
[-] addpart [edit]
[-] consoletype [edit]
[-] agetty [edit]
[-] genhostid [edit]
[-] blkdiscard [edit]
[-] ifdown [edit]
[-] blkid [edit]
[-] netreport [edit]
[-] blockdev [edit]
[-] ppp-watch [edit]
[-] cfdisk [edit]
[-] service [edit]
[-] chcpu [edit]
[-] sushell [edit]
[-] clock [edit]
[-] sys-unconfig [edit]
[-] ctrlaltdel [edit]
[-] usernetctl [edit]
[-] delpart [edit]
[-] anacron [edit]
[-] fdformat [edit]
[-] crond [edit]
[-] fdisk [edit]
[-] grub2-set-default [edit]
[-] findfs [edit]
[-] grub2-setpassword [edit]
[-] fsck.cramfs [edit]
[-] fixfiles [edit]
[-] fsck.minix [edit]
[-] genhomedircon [edit]
[-] fsfreeze [edit]
[-] load_policy [edit]
[-] fstrim [edit]
[-] htcacheclean [edit]
[-] hwclock [edit]
[-] semodule [edit]
[-] ldattach [edit]
[-] sestatus [edit]
[-] losetup [edit]
[-] setfiles [edit]
[-] mkfs.cramfs [edit]
[-] setsebool [edit]
[-] mkfs.minix [edit]
[-] dmeventd [edit]
[-] mkswap [edit]
[-] grub2-bios-setup [edit]
[-] nologin [edit]
[-] grub2-install [edit]
[-] partx [edit]
[-] grub2-macbless [edit]
[-] pivot_root [edit]
[-] grub2-mkconfig [edit]
[-] readprofile [edit]
[-] grub2-probe [edit]
[-] resizepart [edit]
[-] grub2-reboot [edit]
[-] rtcwake [edit]
[-] grub2-rpm-sort [edit]
[-] runuser [edit]
[-] dhclient [edit]
[-] sfdisk [edit]
[-] dhclient-script [edit]
[-] sulogin [edit]
[-] blkdeactivate [edit]
[-] grub2-get-kernel-settings [edit]
[-] fuser [edit]
[-] kexec [edit]
[-] makedumpfile [edit]
[-] mkdumprd [edit]
[-] vmcore-dmesg [edit]
[-] grub2-ofpathname [edit]
[-] grub2-sparc64-setup [edit]
[-] fsadm [edit]
[-] lvchange [edit]
[-] lvconvert [edit]
[-] lvcreate [edit]
[-] lvdisplay [edit]
[-] lvextend [edit]
[-] lvmconf [edit]
[-] lvmconfig [edit]
[-] lvmdiskscan [edit]
[-] lvmdump [edit]
[-] lvmetad [edit]
[-] lvmpolld [edit]
[-] lvmsadc [edit]
[-] lvmsar [edit]
[-] lvreduce [edit]
[-] lvremove [edit]
[-] lvrename [edit]
[-] lvresize [edit]
[-] lvscan [edit]
[-] pvchange [edit]
[-] pvcreate [edit]
[-] pvdisplay [edit]
[-] pvmove [edit]
[-] pvremove [edit]
[-] pvresize [edit]
[-] pvscan [edit]
[-] vgcfgbackup [edit]
[-] vgcfgrestore [edit]
[-] vgchange [edit]
[-] vgconvert [edit]
[-] vgcreate [edit]
[-] vgdisplay [edit]
[-] vgexport [edit]
[-] vgextend [edit]
[-] vgimport [edit]
[-] vgimportclone [edit]
[-] vgmerge [edit]
[-] vgmknodes [edit]
[-] vgreduce [edit]
[-] vgremove [edit]
[-] vgrename [edit]
[-] vgscan [edit]
[-] vgsplit [edit]
[-] dmraid [edit]
[-] dmraid.static [edit]
[-] update-smart-drivedb [edit]
[-] dm_dso_reg_tool [edit]
[-] dmevent_tool [edit]
[-] sshd-keygen [edit]
[-] usb_modeswitch [edit]
[-] usb_modeswitch_dispatcher [edit]
[-] abrt-auto-reporting [edit]
[-] abrt-server [edit]
[-] abrtd [edit]
[-] abrt-configuration [edit]
[-] abrt-dbus [edit]
[-] abrt-harvest-pstoreoops [edit]
[-] abrt-harvest-vmcore [edit]
[-] rpcbind [edit]
[-] rpcinfo [edit]
[-] eapol_test [edit]
[-] wpa_cli [edit]
[-] wpa_passphrase [edit]
[-] wpa_supplicant [edit]
[-] NetworkManager [edit]
[-] ether-wake [edit]
[-] ifconfig [edit]
[-] ipmaddr [edit]
[-] iptunnel [edit]
[-] mii-diag [edit]
[-] mii-tool [edit]
[-] nameif [edit]
[-] plipconfig [edit]
[-] route [edit]
[-] slattach [edit]
[-] ebtables [edit]
[-] ebtables-restore [edit]
[-] ebtables-save [edit]
[-] fxload [edit]
[-] plymouth-set-default-theme [edit]
[-] plymouthd [edit]
[-] abrt-install-ccpp-hook [edit]
[-] parted [edit]
[-] partprobe [edit]
[-] waagent [edit]
[-] waagent2.0 [edit]
[-] userhelper [edit]
[-] virt-what [edit]
[-] hypervvssd [edit]
[-] hypervkvpd [edit]
[-] hypervfcopyd [edit]
[-] pm-hibernate [edit]
[-] pm-powersave [edit]
[-] pm-suspend [edit]
[-] pm-suspend-hybrid [edit]
[-] pm-utils-bugreport-info.sh [edit]
[-] rsyslogd [edit]
[-] tuned [edit]
[-] tuned-adm [edit]
[-] setup [edit]
[-] azure-repo-svc [edit]
[-] firewalld [edit]
[-] convertquota [edit]
[-] edquota [edit]
[-] quotacheck [edit]
[-] quotaoff [edit]
[-] quotaon [edit]
[-] quotastats [edit]
[-] repquota [edit]
[-] rpc.rquotad [edit]
[-] setquota [edit]
[-] xqmstats [edit]
[-] cifs.idmap [edit]
[-] cifs.upcall [edit]
[-] mount.cifs [edit]
[-] authconfig [edit]
[-] authconfig-tui [edit]
[-] cacertdir_rehash [edit]
[-] lspci [edit]
[-] setpci [edit]
[-] update-pciids [edit]
[-] audispd [edit]
[-] auditctl [edit]
[-] auditd [edit]
[-] augenrules [edit]
[-] aureport [edit]
[-] ausearch [edit]
[-] autrace [edit]
[-] dnssec-keygen [edit]
[-] ddns-confgen [edit]
[-] dnssec-keyfromlabel [edit]
[-] dnssec-checkds [edit]
[-] dnssec-keymgr [edit]
[-] dnssec-coverage [edit]
[-] dnssec-revoke [edit]
[-] dnssec-dsfromkey [edit]
[-] apachectl [edit]
[-] runq [edit]
[-] dnssec-importkey [edit]
[-] exim [edit]
[-] biosdevname [edit]
[-] dump-acct [edit]
[-] regdbdump [edit]
[-] dump-utmp [edit]
[-] setregdomain [edit]
[-] mdadm [edit]
[-] mdmon [edit]
[-] raid-check [edit]
[-] smartctl [edit]
[-] smartd [edit]
[-] httpd [edit]
[-] atrun [edit]
[-] rotatelogs [edit]
[-] irqbalance [edit]
[-] suexec [edit]
[-] ntpdate [edit]
[-] fcgistarter [edit]
[-] chronyd [edit]
[-] named-checkconf [edit]
[-] intel-microcode2ucode [edit]
[-] modsec-sdbm-util [edit]
[-] kpatch [edit]
[-] mysqld [edit]
[-] cryptsetup [edit]
[-] mysqld-debug [edit]
[-] tcpdump [edit]
[-] exigrep [edit]
[-] tcpslice [edit]
[-] dovecot [edit]
[-] accessdb [edit]
[-] dovecot_cpshutdown [edit]
[-] iprconfig [edit]
[-] exicyclog [edit]
[-] iprdbg [edit]
[-] exim_checkaccess [edit]
[-] iprdump [edit]
[-] exim_dbmbuild [edit]
[-] iprinit [edit]
[-] exim_fixdb [edit]
[-] iprsos [edit]
[-] exim_dumpdb [edit]
[-] iprupdate [edit]
[-] named-checkzone [edit]
[-] yum-complete-transaction [edit]
[-] exim_lock [edit]
[-] yumdb [edit]
[-] exim_tidydb [edit]
[-] badblocks [edit]
[-] eximstats [edit]
[-] debugfs [edit]
[-] exinext [edit]
[-] dumpe2fs [edit]
[-] exiqgrep [edit]
[-] e2freefrag [edit]
[-] exiqsumm [edit]
[-] e2image [edit]
[-] exiwhat [edit]
[-] e2undo [edit]
[-] pdns_server [edit]
[-] e4defrag [edit]
[-] sendmail [edit]
[-] filefrag [edit]
[-] whmapi0 [edit]
[-] logsave [edit]
[-] named-compilezone [edit]
[-] mklost+found [edit]
[-] whmlogin [edit]
[-] resize2fs [edit]
[-] fsck.vfat [edit]
[-] mkfs.vfat [edit]
[-] brctl [edit]
[-] genrandom [edit]
[-] whmapi1 [edit]
[-] e2fsck [edit]
[-] fsck.ext2 [edit]
[-] fsck.ext3 [edit]
[-] fsck.ext4 [edit]
[-] dnssec-verify [edit]
[-] gss-server [edit]
[-] e2label [edit]
[-] tune2fs [edit]
[-] mkdosfs [edit]
[-] mkfs.msdos [edit]
[-] chgpasswd [edit]
[-] isc-hmac-fixup [edit]
[-] exportfs [edit]
[-] mke2fs [edit]
[-] mkfs.ext2 [edit]
[-] mkfs.ext3 [edit]
[-] mkfs.ext4 [edit]
[-] paperconfig [edit]
[-] xfsdump [edit]
[-] sim_server [edit]
[-] xfsinvutil [edit]
[-] uuserver [edit]
[-] xfsrestore [edit]
[-] pure-certd [edit]
[-] visudo [edit]
[-] pure-authd [edit]
[-] btrfs [edit]
[-] named-journalprint [edit]
[-] btrfs-convert [edit]
[-] nsec3hash [edit]
[-] btrfs-debug-tree [edit]
[-] rndc-confgen [edit]
[-] btrfs-find-root [edit]
[-] pure-ftpwho [edit]
[-] btrfs-image [edit]
[-] tsig-keygen [edit]
[-] btrfs-map-logical [edit]
[-] named [edit]
[-] btrfs-select-super [edit]
[-] lwresd [edit]
[-] btrfs-zero-log [edit]
[-] pure-config.pl [edit]
[-] btrfsck [edit]
[-] pure-ftpd [edit]
[-] btrfstune [edit]
[-] pure-quotacheck [edit]
[-] fsck.btrfs [edit]
[-] pure-mrtginfo [edit]
[-] mkfs.btrfs [edit]
[-] pure-uploadscript [edit]
[-] ledctl [edit]
[-] gssproxy [edit]
[-] ledmon [edit]
[-] mount.nfs [edit]
[-] ntsysv [edit]
[-] mount.nfs4 [edit]
[-] rfkill [edit]
[-] osd_login [edit]
[-] dosfsck [edit]
[-] rpc.statd [edit]
[-] dosfslabel [edit]
[-] umount.nfs [edit]
[-] fatlabel [edit]
[-] umount.nfs4 [edit]
[-] fsck.fat [edit]
[-] blkmapd [edit]
[-] fsck.msdos [edit]
[-] aad_certhandler [edit]
[-] mkfs.fat [edit]
[-] dnssec-settime [edit]
[-] dnssec-signzone [edit]
[-] restorecon [edit]
[-] mountstats [edit]
[-] nfsdcltrack [edit]
[-] nfsidmap [edit]
[-] nfsiostat [edit]
[-] nfsstat [edit]
[-] rpc.gssd [edit]
[-] rpc.idmapd [edit]
[-] rpc.mountd [edit]
[-] rpc.nfsd [edit]
[-] rpcdebug [edit]
[-] showmount [edit]
[-] sm-notify [edit]
[-] start-statd [edit]
[-] cgdisk [edit]
[-] fixparts [edit]
[-] gdisk [edit]
[-] sgdisk [edit]
[-] aaduseradd [edit]
[-] aaduserdel [edit]
[-] start-stop-daemon [edit]